Low-Maintenance Shutters Fitted to Each Opening

Vinyl shutters in Bossier City for homes with original window openings that vary in size across the exterior

Brick ranch homes and subdivision houses built across Shreveport and Keithville in the 1970s and 1980s were typically constructed with window openings sized individually to each elevation rather than pulled from a uniform plan, which means the openings on the front of the house may differ from those on the side or rear even when they appear similar from a distance. The Blind Place installs vinyl shutters in Bossier City by measuring each opening on site before any order is placed, so the shutters that arrive are sized to what is actually on the house rather than what a standard catalog dimension assumes. That distinction matters when a shutter that is a quarter-inch too narrow will gap visibly against the brick or trim it is supposed to frame.


The installation process begins with the crew measuring each window opening, then selecting or sizing the vinyl panels to fit those dimensions. Vinyl shutters are mounted using hardware matched to the surface they are attaching to — brick anchors for masonry walls, wood screws for trim-mounted installs — and each panel is checked for alignment and consistent gap before the crew moves to the next opening. Because the same team handles measuring and installation, any adjustment needed at the time of hanging can be made without a return trip or a separate order review.


To get an accurate picture of what your home's exterior openings require, schedule an on-site measurement with the installation crew.

What Vinyl Shutter Installation Actually Accomplishes

Vinyl shutters are a practical exterior option because the material does not require painting, resists the surface degradation that affects raw wood over time, and holds its profile shape without warping. From an installation standpoint, vinyl panels are lighter than wood or composite equivalents, which affects the hardware selection — lighter panels can use smaller fasteners without sacrificing holding strength, but the anchor point still needs to be set into the correct substrate to keep the panel from shifting over time. On brick exteriors, that means seating the anchor into the brick face rather than the mortar joint, which provides a more stable hold.


Once the shutters are mounted, the exterior of the home has defined window frames that sit flush against the wall surface with consistent reveals on all four sides. Panels that are correctly sized will not cup away from the wall at the top or bottom, and the mounting points will not be visible behind the panel face. The Blind Place Shreveport checks each panel for level, consistent gap, and flat contact with the mounting surface before finishing any exterior shutter job.


Vinyl shutters are available in several profile styles — flat panel, raised panel, and louvered — and the right choice depends on the architectural character of the home and what the existing exterior trim already establishes. Louvered panels are the most common selection for ranch-style homes in this area because they coordinate with the horizontal emphasis of the roofline and window trim, but raised panel options are appropriate where the trim is more formal.

Questions Before Starting Your Project

The following questions address how vinyl shutter installation is approached in practice, including what drives the sizing decisions and what the crew verifies before the job is finished.

  • Why does measuring each window opening individually matter for vinyl shutters?

    Window openings on homes built in the 1970s and 1980s often differ by an inch or more from one side of the house to the other, and a shutter ordered to a catalog size will not sit flush or frame the opening correctly if the actual dimension is different.

  • What anchoring method is used for vinyl shutters on a brick exterior?

    On brick, the mounting hardware is set into the brick face using a masonry bit and an anchor sized to the fastener, because a screw seated only in mortar will loosen over time as the mortar weathers.

  • How does the crew confirm a vinyl shutter panel is correctly installed?

    Each panel is checked for level across the top and sides, the gap between the panel edge and the window casing is measured at multiple points to confirm it is consistent, and the panel face is pressed to verify it sits flat without bowing away from the wall.

  • What is the difference between louvered and raised panel vinyl shutters, and how does that choice affect the look?

    Louvered shutters have horizontal slat lines across the face of the panel, while raised panels have a bordered rectangular field — the right style depends on the trim profile and architectural character already present on the home's exterior.

  • How should vinyl shutters be maintained after installation to keep them looking correct?

    Vinyl shutter panels can be cleaned with a low-pressure rinse and a soft brush to remove surface buildup, and the mounting hardware should be checked periodically to confirm that fasteners have not backed out as the wall material settles.

The Blind Place Shreveport also installs vinyl shutters in Vivian, Haughton, Shreveport, Minden, and Blanchard. Call (318) 742-7287 to arrange a measurement appointment and confirm the right panel style and sizing for your home's exterior openings.