Coverings Cut to Arches and Angles

Specialty Shapes in Bossier City for arched transoms, angled bay windows, and accent openings that stock sizes leave bare

An arched transom over the front door or an angled window at the top of a vaulted wall is often the one bare opening in the room, because no stock blind fits a curve. The Blind Place Shreveport covers those windows with specialty shapes, custom-cut treatments for arched, angled, and other non-rectangular openings, with measurement and installation handled by its own in-house crew. In Bossier City, these windows turn up in homes across many neighborhoods, from arched transoms to angled bays and accent openings.


Specialty windows need a careful template rather than a simple width-and-height measurement, so the in-house measurer traces the exact shape and notes the mount surface. That template becomes the pattern for the custom piece, which is why the same crew that traced it also handles the install.


Request a template visit so your arched or angled window is traced to its exact shape.

What a Templated Specialty Shape Actually Accomplishes

Tracing the opening captures what a tape measure misses: an arch that is not a perfect half-circle, a slope that differs slightly from one side to the other, or narrow trim. Noting the mount surface matters because a shape set inside the frame needs a different template than one mounted over the trim.


When the installer fits the custom piece, it sits flush against the window and follows the line of the arch or angle instead of leaving gaps at the edges. Shapes that open or tilt are checked to operate cleanly within the shape. The Blind Place Shreveport has served homeowners here for over 40 years with in-house measurement and installation of custom products.


Some specialty shapes are fixed in place to cover the glass, while others open or tilt. A specialty piece above a rectangular window is often paired with a matching treatment below, so the two are planned together at the same measurement.

What Homeowners Ask About Odd-Shaped Windows

These questions cover how arched and angled windows are measured and fitted in the homes where they are most common.

  • Why can't an arched window be measured like a regular window?

    An arch changes height across its width, so a single width-and-height reading cannot capture the curve, and the measurer traces a template of the exact shape instead.

  • What is the mount surface and why is it noted?

    The mount surface is where the treatment attaches, inside the frame or on the trim, and the template is cut differently depending on which one your window has.

  • How do angled bay windows in Bossier City homes get covered?

    Each pane in an angled bay is measured as its own opening, and specialty pieces are cut to follow any sloped or non-rectangular edges.

  • What should you check once a specialty shape is installed?

    Look for a flush fit against the window with no gaps along the curve or angle, and if the piece operates, confirm it moves cleanly within the shape.

  • When does a specialty shape stay fixed rather than open?

    Fixed coverings are common on arches and high accent windows that are out of reach, while shapes closer to hand can be made to open or tilt.

A traced template lets a covering follow an arch. The Blind Place Shreveport also installs specialty shapes in Blanchard, Haughton, Vivian, Minden and Shreveport. Bring photos of your arched or angled windows to The Blind Place Shreveport showroom, or have the crew come out to trace them.