Shutters Built to Outlast Original Window Trim

Composite shutters in Bossier City for homes where original window frames need a durable, well-fitted covering

What changes when composite shutters replace tired or missing window coverings is immediately visible from both inside and outside the home: the window has a finished, structured frame that holds its shape and sits flat against the opening. The Blind Place Shreveport produces that result for homeowners in Bossier City by supplying and installing composite shutters sized to each window rather than adapted from a catalog standard. The same team that measures every opening is the one that returns to hang each panel, which matters when the window frames being fitted are original to a 1970s or 1980s build and carry the small dimensional quirks common to that construction era.


Composite shutters are built from an engineered material that gives the appearance of painted wood without the expansion, cracking, or warping that solid wood can develop when exposed to humidity changes in an occupied room. Each shutter is sized to the specific window opening during an on-site measurement, then fitted with hinges or frame-mounted hardware suited to the way the panel needs to operate. The crew hangs each panel, checks that it sits flush within or against the window frame, and confirms that the louvers open and close smoothly through their full range before the job is finished.


Request a window measurement to see how composite shutters will fit and finish your specific openings.

Why Composite Material Changes the Installation Decision

The distinction between composite and solid wood shutters shows up most clearly in how each material responds to the interior conditions of an occupied home. Composite shutter panels are constructed with a stable core that does not swell or contract as indoor moisture levels shift, which means the louver tension and panel alignment set during installation stay consistent over time. Solid wood requires more attention to the interior environment to maintain that stability. For rooms with variable humidity — laundry areas, bathrooms, kitchens — composite is generally the more practical choice.


Once the shutters are in place, the window opening has a clean, defined border with panels that lie flat against the frame and louvers that tilt to a consistent angle across the full width. Homes in the Bossier City area that still carry their original 1970s and 1980s windows often have window openings with slight out-of-square conditions, and each shutter is fitted and adjusted on site so the panels close without gaps or visible tilt.


The installation includes the frame, hinges, and any adjustments needed to bring the panels into alignment before The Blind Place Shreveport considers the job complete. Louver rods are checked for smooth operation, and each panel is opened and closed through a full cycle to confirm that the hardware holds without movement or play.

Answers About How the Work Is Done

These questions address the specifics of composite shutter installation, including how panels are fitted to older or non-standard window openings and what the finished result looks like.

  • How is each composite shutter sized to the window?

    The crew measures the actual window opening on site, accounting for the frame depth and any out-of-square conditions, and the panels are ordered or cut to those dimensions so the fit is tight without forcing the panel into place.

  • What hardware is used to mount composite shutter panels?

    Panels are typically mounted with a face frame or L-frame attached to the window casing, and hinges are selected based on panel weight and the direction of swing the opening requires.

  • How does a composite shutter differ from a wood shutter in terms of long-term fit?

    Composite panels maintain their dimensions more consistently over time because the core material does not absorb moisture the way natural wood grain does, so the louver tension and panel alignment tend to stay closer to their original installation setting.

  • What does the crew check before finishing a composite shutter installation in Bossier City?

    Each panel is opened and closed through a full swing, the louvers are tilted through their full range to confirm the rod moves without binding, and the frame is checked for level and even contact with the window casing at all four sides.

  • When are composite shutters a better fit than a fabric shade for the same window?

    Shutters provide a rigid, structured covering that is appropriate when the window is in a high-traffic area, when the homeowner wants precise light control through louver adjustment, or when the window needs a more permanent finished look that coordinates with the surrounding millwork.

The Blind Place Shreveport also installs composite shutters in Shreveport, Haughton, Vivian, Minden, and Blanchard. To discuss your windows and get an accurate fit, call (318) 742-7287 to schedule an in-home measurement.