Window Shades Ordered to Your Actual Frame Dimensions
Shade installation in Bossier City for original window openings that were not built to accommodate modern covering hardware
Original windows in 1970s and 1980s Bossier City subdivision homes were sized for drapes and simple rod hardware, not for the headrail depth and operating clearance that contemporary roller or cellular shades require. When frame depth is shallower than the shade mechanism needs, an inside mount that looked right on paper leaves the shade pressing against the glass or the operating controls fouling on the trim. The Blind Place Shreveport measures and installs window shades with the same in-house crew from the first site visit to the finished job, so the person confirming frame depth and clearance at each window is the same person returning to mount the brackets and test the controls.
At each window, the installer checks the inside frame depth, the clearance between the sill and any protruding trim, and whether obstructions like a crank handle or a window lock will interfere with the shade mechanism during operation. Those details determine whether an inside mount is workable or whether an outside mount positioned above the casing is the right call before the shade is ordered—not after it arrives.
Request a home measuring visit to confirm frame depth and mount options at each window before any shade is selected or sized.
How Window Shade Installation Is Done Correctly
After the shades are fabricated to the measured dimensions, the crew returns to mount brackets into solid framing material at each window. Drywall alone does not carry the repeated load of a shade being raised and lowered daily; the bracket location is chosen so fasteners reach the window frame or a nailer behind the wall surface. Stop positions on the lift cord or operating chain are set before the crew leaves so the shade bottoms out at the sill rather than overrunning it.
Once installation is complete, each shade is raised, lowered, and operated through its full travel with you present so adjustments to cord tension, stop depth, or bracket alignment are made on the spot. The visible result is a shade that sits level across its full width, clears all trim details when raised, and drops to a consistent height at the sill. The Blind Place Shreveport walks through that operation test at every window before the crew signs off and leaves the home.
The installation scope covers the measuring visit, bracket mounting into solid material, shade hanging, stop and control adjustment, and the operation test at each window. Repairing existing window coverings in the same home can be handled during the same appointment if needed rather than scheduled separately.
Answers About How Window Shade Installation Works
The questions below cover how shades are measured, why frame depth affects the process, and what correctly installed shades should do when you operate them.
What is frame depth and why does it matter for shade installation?
Frame depth is the distance from the front face of the window casing to the glass surface; it determines whether the shade headrail and its operating mechanism fit entirely inside the opening without pressing against the glass or projecting past the casing face.
How do you decide whether to mount a shade inside or outside the window frame?
Inside mounting is used when frame depth is sufficient to clear the headrail and operating hardware with room to spare; outside mounting, positioned above the casing on the wall surface, is the better approach when depth is shallow or when trim details would be obscured by an inside-mounted headrail.
Why are brackets mounted into solid framing material rather than just into drywall?
A shade raised and lowered daily applies repeated pull load to the bracket fastener; anchoring into the window frame or a nailer spreads that load into structural material and prevents the bracket from working loose over months of use.
What should you check when a shade is first operated after installation?
Raise the shade fully to confirm it clears sill trim without binding, lower it to confirm it reaches the sill at a consistent height across its width, and verify that stop positions are set so the shade does not overrun either extreme of its travel.
How does operating clearance affect shade selection in older Bossier City homes?
Older single-pane windows with crank or latch hardware projecting into the frame opening reduce the usable inside-mount depth; the installer identifies those obstructions during the measuring visit and either selects a headrail profile shallow enough to clear them or recommends an outside mount instead.
The Blind Place Shreveport also installs window shades in Shreveport, Haughton, Vivian, Minden, and Blanchard. To move forward, set up a measuring appointment with The Blind Place Shreveport so every window in the home is assessed for depth, clearance, and mount type before any shade is fabricated.